Cleaned up comments

auto_class_sorter.ic10

@@ -1,5 +1,7 @@
-# Runs up to six sorters that filter throughput by ItemClass
-# When looking at the outputs, left = ITEMCLASS, right = everything else
+# Runs up to six sorters that filter
+# throughput by ItemClass.
+# When looking at the outputs,
+# left = ITEMCLASS, right = everything else
 
 alias SlotOccupied r0
 alias InputClass r1
@@ -8,7 +10,7 @@ alias SorterCounter r3
 
 move SorterCounter 0
 
-define ITEMCLASS 19 # 10=ores, 19=ingots, 33=wrekage
+define ITEMCLASS 19 # 10=ores,19=ingots,33=wrekage
 define INPUTSLOT 0 # sorter input-slot
 
 start:
@@ -19,10 +21,12 @@ j start
 
 sort:
 s dr3 Mode 2 # set sorter to IC mode
-ls SlotOccupied dr3 INPUTSLOT Occupied # check if anything to sort
+# check if anything to sort
+ls SlotOccupied dr3 INPUTSLOT Occupied 
 beqz SlotOccupied ra
 ls InputClass dr3 INPUTSLOT Class
-seq IsClass InputClass ITEMCLASS # change seq to sne to swap output ports
+# change seq to sne to swap output ports
+seq IsClass InputClass ITEMCLASS
 s dr3 Output IsClass
 j ra
 

auto_item_sorter.ic10

@@ -47,7 +47,7 @@ s dr0 Output IsItem
 j ra
 
 reset:
-# Resets counter to 0 zero so we can loop over again
+# Resets counter to zero so we can loop over again
 move counter 0
 yield
 j start

battery_monitor.ic10

@@ -1,4 +1,4 @@
-# Uses a Diode Slide to show battery-bank fill-level.
+# Uses a Diode Slide to show battery-bank levels
 # You can add a Cable Analyzer between generators
 # and batteries so an LED light can show if system
 # is charging or discharging.

filtration.ic10

@@ -34,12 +34,14 @@ yield
 # Check storage pressure
 l OutPressure filtration PressureOutput
 slt FilterActive OutPressure MAXPRESSURE
-beqz FilterActive filteronoff # if pressure > MAX, skip to shutdown
+# if pressure > MAX, skip to shutdown
+beqz FilterActive filteronoff
 
 # Check temperature
 l InTemperature filtration TemperatureInput
 slt FilterActive InTemperature MAXTEMPERATURE
-beqz FilterActive filteronoff # if temperature > MAX, skip to shutdown
+# if temperature > MAX, skip to shutdown
+beqz FilterActive filteronoff
 
 # Check filters and set diodes
 ls FilterLeft filtration 0 Quantity

mush_cooler.ic10

@@ -1,5 +1,5 @@
-# Connect mush-pipe to Heat Exchanger, use Digital Valve
-# to expose heat-exchanger to radiators
+# Connect mush-pipe to Heat Exchanger, use Digital
+# Valve to expose heat-exchanger to radiators
 
 alias PipeAnalyzer d0
 alias DigitalValve d1

solar_tracking.ic10

@@ -1,5 +1,5 @@
 alias Sensor d0 # Kit (Sensor) > Daylight Sensor
-# Place sensor facing UP, and not in an enclosed space
+# Place daylight-sensor facing UP
 alias Display d1 # Optional, Kit (Console)
 alias PanelType1 d2 # Any controllable Solar Panel
 alias PanelType2 d3 # Optional