Initial commit

cooling_tower_drain.ic10

@@ -0,0 +1,32 @@
+# Automatically evacuates cooling-tower when temp
+# is below 40C (39.85C)
+# needs a volume pump and a gas analyzer
+
+alias sensor d0
+alias pump d1
+
+alias pipe_temp r0
+alias pipe_press r1
+alias temp_go r2
+alias press_go r3
+alias pump_go r4
+
+define temp_thresh 313 # 39.85C
+
+# Sets volume pump max capacity
+l pipe_press pump Maximum
+s pump Setting pipe_press
+
+start:
+yield
+# Loads cooling-tower pressure and temp
+l pipe_temp sensor Temperature
+l pipe_press sensor Pressure
+# Checks if temp is below threshold
+slt temp_go pipe_temp temp_thresh
+sgtz press_go pipe_press
+# If cooling-tower has pressure, and temp is safe..
+and pump_go temp_go press_go
+# ...activate pump
+s pump On pump_go
+j start

gas_mixer.ic10

@@ -0,0 +1,63 @@
+# Gas-mixing script. Needs two source-tanks and an
+# output tank, a gas-mixer, a (turbo) volume pump,
+# and a Kit (Button, moment type) to trigger purge.
+# Gas mixer ratio is manually set!
+
+alias tank_a d0
+alias tank_b d1
+alias tank_out d2
+alias mixer d3
+alias pump d4
+alias button d5
+
+alias tank_a_press r0
+alias tank_b_press r1
+alias tank_out_press r2
+alias tank_a_ok r3
+alias tank_b_ok r4
+alias tank_out_ok r5
+alias mixer_run r6
+alias purge_activate r7
+
+# Stops mixing if either input-gas is below 500kPa
+define press_in_min 500
+# Stops mixing if output-tank is "full"
+define press_out_max 58000
+
+# Sets purge pump to max output
+l tank_a_press pump Maximum
+s pump Setting tank_a_press
+
+start:
+yield
+s pump On 0 # Ensures purge pump is off
+# Checks is purge is activated
+l purge_activate button Setting
+bgtz purge_activate purge
+
+# Loads tank pressures
+l tank_a_press tank_a Pressure
+l tank_b_press tank_b Pressure
+l tank_out_press tank_out Pressure
+
+# Checks if pressures are within tolerances
+sgt tank_a_ok tank_a_press press_in_min
+sgt tank_b_ok tank_b_press press_in_min
+slt tank_out_ok tank_out_press press_out_max
+
+and mixer_run tank_a_ok tank_b_ok
+and mixer_run tank_out_ok mixer_run
+
+# Activates mixer if all is ok
+s mixer On mixer_run
+j start
+
+purge:
+yield
+s mixer On 0 # Turns mixer off
+# Gets output tank pressure
+l tank_out_press tank_out Pressure
+s pump On 1 # Activates purge pump
+# Runs pump until tank is empty
+bgtz tank_out_press purge
+j start