<?php
/* vim: set expandtab sw=4 ts=4 sts=4: */
/**
 * This library is used with the server IP allow/deny host authentication
 * feature
 *
 * @package PhpMyAdmin
 */
if (! defined('PHPMYADMIN')) {
    exit;
}

/**
 * Gets the "true" IP address of the current user
 *
 * @return string   the ip of the user
 *
 * @access  private
 */
function PMA_getIp()
{
    /* Get the address of user */
    if (!empty($_SERVER['REMOTE_ADDR'])) {
        $direct_ip = $_SERVER['REMOTE_ADDR'];
    } else {
        /* We do not know remote IP */
        return false;
    }

    /* Do we trust this IP as a proxy? If yes we will use it's header. */
    if (isset($GLOBALS['cfg']['TrustedProxies'][$direct_ip])) {
        $trusted_header_value
            = PMA_getenv($GLOBALS['cfg']['TrustedProxies'][$direct_ip]);
        $matches = array();
        // the $ checks that the header contains only one IP address,
        // ?: makes sure the () don't capture
        $is_ip = preg_match(
            '|^(?:[0-9]{1,3}\.){3,3}[0-9]{1,3}$|',
            $trusted_header_value, $matches
        );
        if ($is_ip && (count($matches) == 1)) {
            // True IP behind a proxy
            return $matches[0];
        }
    }

    /* Return true IP */
    return $direct_ip;
} // end of the 'PMA_getIp()' function


/**
 * Matches for IPv4 or IPv6 addresses
 *
 * @param string $testRange string of IP range to match
 * @param string $ipToTest  string of IP to test against range
 *
 * @return boolean    whether the IP mask matches
 *
 * @access  public
 */
function PMA_ipMaskTest($testRange, $ipToTest)
{
    $result = true;

    if (strpos($testRange, ':') > -1 || strpos($ipToTest, ':') > -1) {
        // assume IPv6
        $result = PMA_ipv6MaskTest($testRange, $ipToTest);
    } else {
        $result = PMA_ipv4MaskTest($testRange, $ipToTest);
    }

    return $result;
} // end of the "PMA_ipMaskTest()" function


/**
 * Based on IP Pattern Matcher
 * Originally by J.Adams <jna@retina.net>
 * Found on <http://www.php.net/manual/en/function.ip2long.php>
 * Modified for phpMyAdmin
 *
 * Matches:
 * xxx.xxx.xxx.xxx        (exact)
 * xxx.xxx.xxx.[yyy-zzz]  (range)
 * xxx.xxx.xxx.xxx/nn     (CIDR)
 *
 * Does not match:
 * xxx.xxx.xxx.xx[yyy-zzz]  (range, partial octets not supported)
 *
 * @param string $testRange string of IP range to match
 * @param string $ipToTest  string of IP to test against range
 *
 * @return boolean    whether the IP mask matches
 *
 * @access  public
 */
function PMA_ipv4MaskTest($testRange, $ipToTest)
{
    $result = true;
    $match = preg_match(
        '|([0-9]+)\.([0-9]+)\.([0-9]+)\.([0-9]+)/([0-9]+)|',
        $testRange,
        $regs
    );
    if ($match) {
        // performs a mask match
        $ipl    = ip2long($ipToTest);
        $rangel = ip2long(
            $regs[1] . '.' . $regs[2] . '.' . $regs[3] . '.' . $regs[4]
        );

        $maskl  = 0;

        for ($i = 0; $i < 31; $i++) {
            if ($i < $regs[5] - 1) {
                $maskl = $maskl + PMA_Util::pow(2, (30 - $i));
            } // end if
        } // end for

        if (($maskl & $rangel) == ($maskl & $ipl)) {
            return true;
        } else {
            return false;
        }
    } else {
        // range based
        $maskocts = explode('.', $testRange);
        $ipocts   = explode('.', $ipToTest);

        // perform a range match
        for ($i = 0; $i < 4; $i++) {
            if (preg_match('|\[([0-9]+)\-([0-9]+)\]|', $maskocts[$i], $regs)) {
                if (($ipocts[$i] > $regs[2]) || ($ipocts[$i] < $regs[1])) {
                    $result = false;
                } // end if
            } else {
                if ($maskocts[$i] <> $ipocts[$i]) {
                    $result = false;
                } // end if
            } // end if/else
        } //end for
    } //end if/else

    return $result;
} // end of the "PMA_ipv4MaskTest()" function


/**
 * IPv6 matcher
 * CIDR section taken from http://stackoverflow.com/a/10086404
 * Modified for phpMyAdmin
 *
 * Matches:
 * xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
 * (exact)
 * xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:[yyyy-zzzz]
 * (range, only at end of IP - no subnets)
 * xxxx:xxxx:xxxx:xxxx/nn
 * (CIDR)
 *
 * Does not match:
 * xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xx[yyy-zzz]
 * (range, partial octets not supported)
 *
 * @param string $test_range string of IP range to match
 * @param string $ip_to_test string of IP to test against range
 *
 * @return boolean    whether the IP mask matches
 *
 * @access  public
 */
function PMA_ipv6MaskTest($test_range, $ip_to_test)
{
    $result = true;

    // convert to lowercase for easier comparison
    $test_range = strtolower($test_range);
    $ip_to_test = strtolower($ip_to_test);

    $is_cidr = strpos($test_range, '/') > -1;
    $is_range = strpos($test_range, '[') > -1;
    $is_single = ! $is_cidr && ! $is_range;

    $ip_hex = bin2hex(inet_pton($ip_to_test));

    if ($is_single) {
        $range_hex = bin2hex(inet_pton($test_range));
        $result = $ip_hex === $range_hex;
    } elseif ($is_range) {
        // what range do we operate on?
        $range_match = array();
        $match = preg_match(
            '/\[([0-9a-f]+)\-([0-9a-f]+)\]/', $test_range, $range_match
        );
        if ($match) {
            $range_start = $range_match[1];
            $range_end   = $range_match[2];

            // get the first and last allowed IPs
            $first_ip  = str_replace($range_match[0], $range_start, $test_range);
            $first_hex = bin2hex(inet_pton($first_ip));
            $last_ip   = str_replace($range_match[0], $range_end, $test_range);
            $last_hex  = bin2hex(inet_pton($last_ip));

            // check if the IP to test is within the range
            $result = ($ip_hex >= $first_hex && $ip_hex <= $last_hex);
        }
    } elseif ($is_cidr) {
        // Split in address and prefix length
        list($first_ip, $subnet) = explode('/', $test_range);

        // Parse the address into a binary string
        $first_bin = inet_pton($first_ip);
        $first_hex = bin2hex($first_bin);

        // Overwriting first address string to make sure notation is optimal
        $first_ip = inet_ntop($first_bin);

        $flexbits = 128 - $subnet;

        // Build the hexadecimal string of the last address
        $last_hex = $first_hex;

        $pos = 31;
        while ($flexbits > 0) {
            // Get the character at this position
            $orig = substr($last_hex, $pos, 1);

            // Convert it to an integer
            $origval = hexdec($orig);

            // OR it with (2^flexbits)-1, with flexbits limited to 4 at a time
            $newval = $origval | (pow(2, min(4, $flexbits)) - 1);

            // Convert it back to a hexadecimal character
            $new = dechex($newval);

            // And put that character back in the string
            $last_hex = substr_replace($last_hex, $new, $pos, 1);

            // We processed one nibble, move to previous position
            $flexbits -= 4;
            $pos -= 1;
        }

        // check if the IP to test is within the range
        $result = ($ip_hex >= $first_hex && $ip_hex <= $last_hex);
    }

    return $result;
} // end of the "PMA_ipv6MaskTest()" function


/**
 * Runs through IP Allow/Deny rules the use of it below for more information
 *
 * @param string $type 'allow' | 'deny' type of rule to match
 *
 * @return bool   Matched a rule ?
 *
 * @access  public
 *
 * @see     PMA_getIp()
 */
function PMA_allowDeny($type)
{
    global $cfg;

    // Grabs true IP of the user and returns if it can't be found
    $remote_ip = PMA_getIp();
    if (empty($remote_ip)) {
        return false;
    }

    // copy username
    $username  = $cfg['Server']['user'];

    // copy rule database
    $rules     = $cfg['Server']['AllowDeny']['rules'];

    // lookup table for some name shortcuts
    $shortcuts = array(
        'all'       => '0.0.0.0/0',
        'localhost' => '127.0.0.1/8'
    );

    // Provide some useful shortcuts if server gives us address:
    if (PMA_getenv('SERVER_ADDR')) {
        $shortcuts['localnetA'] = PMA_getenv('SERVER_ADDR') . '/8';
        $shortcuts['localnetB'] = PMA_getenv('SERVER_ADDR') . '/16';
        $shortcuts['localnetC'] = PMA_getenv('SERVER_ADDR') . '/24';
    }

    foreach ($rules as $rule) {
        // extract rule data
        $rule_data = explode(' ', $rule);

        // check for rule type
        if ($rule_data[0] != $type) {
            continue;
        }

        // check for username
        if (($rule_data[1] != '%') //wildcarded first
            && ($rule_data[1] != $username)
        ) {
            continue;
        }

        // check if the config file has the full string with an extra
        // 'from' in it and if it does, just discard it
        if ($rule_data[2] == 'from') {
            $rule_data[2] = $rule_data[3];
        }

        // Handle shortcuts with above array
        if (isset($shortcuts[$rule_data[2]])) {
            $rule_data[2] = $shortcuts[$rule_data[2]];
        }

        // Add code for host lookups here
        // Excluded for the moment

        // Do the actual matching now
        if (PMA_ipMaskTest($rule_data[2], $remote_ip)) {
            return true;
        }
    } // end while

    return false;
} // end of the "PMA_AllowDeny()" function

?>